Y5uL8x5dLIwrw5AEn7QogZalYYU
JC Scuba Ltd Swindon Logo

tel:  01793 423 363

_DyaolJCKh8TMpl5fQTU2MUjXIw
u2tZwmjPuvomb6f6NoB3U_QR8dQ
283ijHlAPbyoMKbcR5-m2rR71u8
IXVXiryAuYjxt0KBUanJ-ibmtd0
2mgydZIKuyZj9t4iRVhbtlgKgxg
x-h9fthCmJVt-9ZF97iiDZpe-DM
o-5-TYKCtsBU6snaCjK38S7Dlfo
Scuba Diving Cylinder O2 Cleaning, Hydrostatic Testing Wiltshire
Cylinder Testing and Servicing Swindon

Servicing - Cylinder Testing

Every cylinder that is used for diving (or compressed gases) should be tested and inspected by law.  A hydrostatic test needs to be taken every 5 years or if visual inspection is out of date by 30 days.  A visual test needs to be undertaken every 2½ years.

 

If the cylinder is to be used for nitrogen/enriched air, the cylinder should be O2 cleaned, which needs to be undertaken every 15 months.  Note IDEST T014 January 2020.

zoT1pxEyc_Z7ViwX7vJAGHyE6hg
1FLc8HjqDAH9hPU8MUxxAvWlZTE

Visual Inspection (Includes Valve Service) ........

 

                                          extra O2 Clean ........

                         extra Sticker (Required) ...........

 

Hydrostatic Test (Includes Valve Service) .........

 

O2 Cleaning Only ...............................................

 

Cylinder Valve Service .......................................

 

 

Internal Shot Blast ..............................................

 

External Paint .....................................................

 

Twinset Surcharge (Strip & Rebuild) ..................

 

Cylinder Failure (Scrap Cost) ..............................

 

Please note:

Prices quoted for servicing listed above, cover labour charges only. Brand-specific service kits and/or replacement parts are charged as extra.

 

January 2020

£36.00

 

£23.00

£1.50

 

£44.50

 

£23.50

 

£22.00

(Plus Parts)

 

£20.00

 

P.O.A.

 

£15.00

 

£25.00

Certificates will be supplied following Cylinder Visual and Hydrostatic Inspections

and Non Destructive Aluminium testing along with IDEST cylinder stamping.

 

Please note:

For cylinder testing a non-refundable £25.00 deposit is required. If a cylinder fails the test it will be destroyed for safety reasons.

 

Cylinders used for surface use ie Airguns and Paintball Cylinders need to be tested every 5 years (dependant on valve).

 

Our policy is that a cylinder with a diving valve in must be tested as a diving cylinder as it could always be used in seawater for the purpose of SCUBA, unless fitted with a surface use valve.

 

Cylinder inspection and testing is carried out in accordance with:

EN1968 or EN5430 Part 2, as applicable and ASSET CP11 (steel cylinders)

BS EN 1802 (aluminium cylinders)

and BS EN ISO 11623 (composite cylinders)

 

We will happily look to price match any like for like written quote on all of our servicing.

JC Scuba Swindon, IDEST Testing
Servicing Note

JC Scuba Ltd are approved by all our suppliers to carry out servicing on their products, and we will only use genuine parts and service packs to ensure this does not invalidate your warranty.

 

If you use unauthorised technicians who are NOT approved by suppliers, this could invalidate your warranty.

 

Our service department has over 25 years’ experience in servicing scuba diving equipment, so you know your equipment is in safe hands.  After all, it is your life support system when you go diving, so keep it regularly serviced.

 

SHOP         ABOUT          CONTACT          CALENDAR          DIVE TRIPS          SCOUTS         DIVE CLUB

Unit 2, Scuderia House, Newcombe Drive, Hawksworth Industrial Estate, Swindon, Wiltshire, SN2 1EG

Email: info@jcscuba.net

PADI Dive Centre No. 21908

Telephone: 01793 423 363

IDEST Testing Centre No 7S

Grey Facebook logo follow us.
Grey Twitter bird logo follow us

Content Copyright © 2013 JC Scuba Ltd. All Rights Reserved. Registered in England & Wales, Company No. 07567416